Manufacturing Technician- Integration (Level 2)
1 hour ago Full Job Description POSITION SUMMARY- Manufacturing Technician- Integration (L2) Under the direction of the Manufacturing Supervisor or other qualified Operations staff, perform a wide variety of tasks and operations that are required to assemble and test Medical Device subassemblies in an FDA regulated manufacturing environment.
Troubleshoot, maintain, and assemble all production equipment, as required.
Assist engineers on projects, repairs, and installations, as necessary.
All operations will be carried out in compliance with GMPs, Standard Operating Procedures (SOPs), BOMs, and other LENSAR standards.
In addition to performing the responsibilities/tasks below, the successful candidate will need to demonstrate the following traits:
Passion and drive to develop and maintain a LEAN culture dedicated to providing the best results for our internal and external customers.
Continuously search for ways to improve/maintain the highest levels of productivity.
Actively participate in a teamwork environment that maintains a high-performance culture.
ESSENTIAL DUTIES AND RESPONSIBILITIES Assemble and test components and subassemblies in compliance to set procedural guidelines, training, and timelines.
Complete final acceptance testing including safety testing of final product, troubleshooting of issues, failure analysis of non-conforming product and participate in special projects as required.
Maintain (calibration & preventative maintenance) and assemble all production equipment and tooling, as required.
Complete relevant paperwork following GMP guidelines and applicable training.
Assist in developing methods and procedures to control, improve, or modify the manufacturing process.
Contribute to revisions of pertinent documentation, as appropriate.
Prior to start-up, during processing, and at the completion of the manufacturing process, perform all documentation and clerical functions to provide the proper accountability and traceability of components and finished products.
Assist in training new technicians, as necessary.
Perform cleaning/ housekeeping duties, as well as other collateral duties as assigned/required.
KNOWLEDGE / EXPERIENCE / SKILLS / EDUCATION To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Required:
Proficiency in the English language - reading, writing, and communication.
Must be able to successfully pass all job-related tests and certifications required for working in a GMP, quality environment including but not limited to inspections and GMP requirements to perform essential functions of the job.
Must re-qualify every year on all job-related tests and certifications as responsibilities or qualifications require.
High school diploma (or equivalent) and Associates Degree in Electrical/Mechanical Technology (or equivalent experience and technical knowledge, as assessed by the interviewing panel).
Computer literate, including ability to interface with computer systems.
Experience working with Microsoft suite (Word, Excel), navigating through web pages and e-mail.
Must possess basic typing skills.
Ability to work overtime and travel as needed.
Ability to read and follow manufacturing work instructions and other product related documentation (schematics/mechanical drawings).
Experience with test equipment such as Oscilloscopes, DVMs, curing systems, soldering tools, and basic hand tools.
Minimum of 3 years (within the last 7 years) experience in assembly of/for complex device and/or equipment in a regulated environment.
Target industries include DoD, pharmaceutical, biotechnology, biomedical, electronic, laser, and/or other medical industries.
Candidates with less than 3 years can also be considered if they show demonstrated proficiency in LENSAR or other comparable complex technology and a good understanding of complex manufacturing integration processes.
PHYSICAL DEMANDS These physical demands are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the Manufacturing Technician - Integration's duties.
Reasonable accommodation can be made to enable people with disabilities to perform the described essential functions of the Manufacturing Technician - Integration's duties and responsibilities.
While performing the duties of this position, the employee is regularly required to communicate.
The employee is frequently required to remain stationary.
The employee is occasionally required to move about the facility.
Occasionally, must be able to lift 45 pounds.
WORK ENVIRONMENT Air-conditioned manufacturing environment, biological labs, clean room environments and dark rooms.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
Troubleshoot, maintain, and assemble all production equipment, as required.
Assist engineers on projects, repairs, and installations, as necessary.
All operations will be carried out in compliance with GMPs, Standard Operating Procedures (SOPs), BOMs, and other LENSAR standards.
In addition to performing the responsibilities/tasks below, the successful candidate will need to demonstrate the following traits:
Passion and drive to develop and maintain a LEAN culture dedicated to providing the best results for our internal and external customers.
Continuously search for ways to improve/maintain the highest levels of productivity.
Actively participate in a teamwork environment that maintains a high-performance culture.
ESSENTIAL DUTIES AND RESPONSIBILITIES Assemble and test components and subassemblies in compliance to set procedural guidelines, training, and timelines.
Complete final acceptance testing including safety testing of final product, troubleshooting of issues, failure analysis of non-conforming product and participate in special projects as required.
Maintain (calibration & preventative maintenance) and assemble all production equipment and tooling, as required.
Complete relevant paperwork following GMP guidelines and applicable training.
Assist in developing methods and procedures to control, improve, or modify the manufacturing process.
Contribute to revisions of pertinent documentation, as appropriate.
Prior to start-up, during processing, and at the completion of the manufacturing process, perform all documentation and clerical functions to provide the proper accountability and traceability of components and finished products.
Assist in training new technicians, as necessary.
Perform cleaning/ housekeeping duties, as well as other collateral duties as assigned/required.
KNOWLEDGE / EXPERIENCE / SKILLS / EDUCATION To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill and/or ability required.
Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
Required:
Proficiency in the English language - reading, writing, and communication.
Must be able to successfully pass all job-related tests and certifications required for working in a GMP, quality environment including but not limited to inspections and GMP requirements to perform essential functions of the job.
Must re-qualify every year on all job-related tests and certifications as responsibilities or qualifications require.
High school diploma (or equivalent) and Associates Degree in Electrical/Mechanical Technology (or equivalent experience and technical knowledge, as assessed by the interviewing panel).
Computer literate, including ability to interface with computer systems.
Experience working with Microsoft suite (Word, Excel), navigating through web pages and e-mail.
Must possess basic typing skills.
Ability to work overtime and travel as needed.
Ability to read and follow manufacturing work instructions and other product related documentation (schematics/mechanical drawings).
Experience with test equipment such as Oscilloscopes, DVMs, curing systems, soldering tools, and basic hand tools.
Minimum of 3 years (within the last 7 years) experience in assembly of/for complex device and/or equipment in a regulated environment.
Target industries include DoD, pharmaceutical, biotechnology, biomedical, electronic, laser, and/or other medical industries.
Candidates with less than 3 years can also be considered if they show demonstrated proficiency in LENSAR or other comparable complex technology and a good understanding of complex manufacturing integration processes.
PHYSICAL DEMANDS These physical demands are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the Manufacturing Technician - Integration's duties.
Reasonable accommodation can be made to enable people with disabilities to perform the described essential functions of the Manufacturing Technician - Integration's duties and responsibilities.
While performing the duties of this position, the employee is regularly required to communicate.
The employee is frequently required to remain stationary.
The employee is occasionally required to move about the facility.
Occasionally, must be able to lift 45 pounds.
WORK ENVIRONMENT Air-conditioned manufacturing environment, biological labs, clean room environments and dark rooms.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
